Perle-systems S-110P Manual de usuario

Perle PoE/PoE+ 10/100 Ethernet Media Converters Installation Guide S-110-P S-110P-XT S-110PP S-110PP-XT S-110P-SFP S-110P-SFP-XT S-1

Perle PoE/PoE+ 10/100 Ethernet Media Converter 10 detection Down Down PSE disabled These switches must be set in order to enable the power sourc

Perle PoE/PoE+ 10/100 Ethernet Media Converter 11 Disabled: The loopback feature is disabled. This is default position for normal operation. The sw

Perle PoE/PoE+ 10/100 Ethernet Media Converter 12 Duplex Fiber (Switch 3) Switch Position Copper port Up (default) Full Duplex Down Half Duplex

Perle PoE/PoE+ 10/100 Ethernet Media Converter 13 Installing the Duplex Fiber Cable 1. Locate a 100Base-X compliant duplex (2 strands) fiber cable

Perle PoE/PoE+ 10/100 Ethernet Media Converter 14 Attaching the Power Cord Strain Relief Clip 1. Remove the screw from the chassis that is close

Perle PoE/PoE+ 10/100 Ethernet Media Converter 15 Extended Temperature models supplied with a PluggableTerminal Block 1. Unplug the terminal bloc

Perle PoE/PoE+ 10/100 Ethernet Media Converter 16 Operation Status LED The Perle PoE/PoE+10/100 Rate converting Media converters have status LEDs

Perle PoE/PoE+ 10/100 Ethernet Media Converter 17 LKC- (Link Status on Copper port) On – Copper link is present Off – No copper link present Blin

Perle PoE/PoE+ 10/100 Ethernet Media Converter 18 Other Features Auto-MDIX Auto-MDIX (automatic medium-dependent interface crossover) detects the

Perle PoE/PoE+ 10/100 Ethernet Media Converter 19 Troubleshooting General 1. Ensure power is supplied to the media converter. Only the Perle provi

Perle PoE/PoE+ 10/100 Ethernet Media Converter 2 Overview This document contains instructions necessary for the installation and operation of the

Perle PoE/PoE+ 10/100 Ethernet Media Converter 20 Method 2: The fiber connection can also be verified by configuring the remote media converter for

Perle PoE/PoE+ 10/100 Ethernet Media Converter 21 Technical Specifications Power Input Voltage: S-110P models: 46V DC to 57V DC

Perle PoE/PoE+ 10/100 Ethernet Media Converter 22 Fiber Optic Specifications: PoE (P) PoE+ (PP) Mode Wavelength (nm) TX Power (dB) RX Power (dB) Bu

Perle PoE/PoE+ 10/100 Ethernet Media Converter 23 Compliance Information FCC This product has been found to comply with the limits for a Class A d

Perle PoE/PoE+ 10/100 Ethernet Media Converter 3 PoE (P) PoE+ (PP) Connector (xx) Mode Distance Wavelength (TX/RX) S-110P-SFP S-110PP-SFP SFP NOTE

Perle PoE/PoE+ 10/100 Ethernet Media Converter 4 Power Sourcing Pinouts When Power Sourcing is enabled on a copper port, the S-110P will provide po

Perle PoE/PoE+ 10/100 Ethernet Media Converter 5 Powering Options Jumper Settings Note: The factory settings for Power Sourcing Pinouts will work f

Perle PoE/PoE+ 10/100 Ethernet Media Converter 6 Bank 2 To access the DIP switches for Bank 2, unscrew the six side screws on the case and remove t

Perle PoE/PoE+ 10/100 Ethernet Media Converter 7 DIP Switch Settings Bank 1 Auto-negotiation (copper) (Switch 1) Switch Position Copper Port Up (d

Perle PoE/PoE+ 10/100 Ethernet Media Converter 8 Standard Mode: In this mode, links on the fiber and copper sides can be brought up and down indepe

Perle PoE/PoE+ 10/100 Ethernet Media Converter 9 Far End Fault (Switch 3) Switch Position Fiber Port Up (default) Enabled Down Disabled Enabled