Perle Systems Switch DS1 Manual de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 246
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
IOLAN DS1/TS2 User’s Guide, Version 4.5 137
Configuring I/O
Interfaces Chapter 10
10
Introduction
There is a line of IOLANs that can control/monitor the following types
of I/O:
z Analog Input
z Digital Input/Output
z Relay Output
z Temperature Input
Some of the models are I/O combinations and some of the models
support one I/O type.
Technical Specifications
Digital I/O
z 2 or 4 channels depending on model
z software selectable as inputs or outputs
z optical isolation of 2000V rms
Digital Input
z Dry Contact: Logic 0 = open. Logic 1 = close to GND
z Wet Contact: Logic 0 = 0-3V. Logic 1 = 10V-30V
Digital Output
z Open collector to 30V (source, sink or both)
z 200mA max load
z Digital out (DO) or pulse mode
Relay
z Form C type SPDT
z Contact rating: 1A@30VDC, 0.5A@AC: 120VAC
z Breakdown voltage: 500 VAC (50/60 Hz)
z Relay on time: 7 msec. Relay off time 3 msec
z Total switching time: 10 msec
z Insulation resistance: 1000 MW minimum at 500 VDC
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 245 246

Comentarios a estos manuales

Sin comentarios