Perle-systems Adaptors Manual de usuario descargar pdf (Pagina 31)

FAST Serial Adaptors User Guide

Installing under Windows 2000/XP/Server 2003/Vista/Server 2008

Page 31

Chapter 2 Installing drivers and host cards

Adding additional cards and/or updating drivers

Whenever you add any additional FAST hardware to your system, Windows might install the

latest digitally signed driver in its database (depending on your Windows operating system

and settings). To ensure you have the latest driver installed after you add new hardware, you

can either:

• Click Start > All Programs > Perle > Perle-Serial > Update Driver

• Reinstall the drivers as described in Installing device drivers and utilities onto your

system on page 29.

Adding AT host cards to the system

When you physically install an AT host card in your system you also need to add the card to

the list of installed devices in the system.

To add AT host cards to your system proceed as follows:

1. In the Windows desktop, click on the Start button and select Settings > Control Panel

The control panel window is now displayed.

2. In the control panel window, double click on the System icon.

The Add/Remove Hardware Wizard is now displayed.

Note

The addresses used by AT-FAST host cards are normally set by

default. This procedure is used when you wish to set non-standard

addresses.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 128 129

Sin comentarios

Perle-systems Adaptors Manual de usuario Pagina 31