Perle Systems Sds4 Manual de usuario descargar pdf (Pagina 277)

100

101

276

Channels

Pulse Mode When Output is set to Pulse, you can specify the manner of the pulse.

Data Options:

z Continuous—Continuously pulses active and inactive.

z Count—Pulses an active/inactive sequence for the specified number of

times.

Default: Continuous

Pulse Count The channel output will pulse for the specified number of times; each count

consists of an active/inactive sequence.

Default: 1

Inactive Signal

Width

How long the channel will remain inactive during pulse mode.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Active Signal

Width

How long the channel will be active during the pulse mode.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Delay When a deactivate command is issued, a delay is implemented before the

command is executed.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Failsafe Action When there has been no I/O activity within the specified time (set in the I/O

Interfaces, Settings on the Failsafe Timer tab) and the

Failsafe Timer is

triggered.

Data Options:

z None—The state of the Digital/Relay output remains the same, no change.

z Activate Output—Activates the channel.

z Deactivate Output—Deactivates the channel.

Default: None

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 459 460

Comentarios a estos manuales

Sin comentarios

Perle Systems Sds4 Manual de usuario Pagina 277

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Perle Systems Sds4