Perle Systems DS1 Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 122
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
Command Line Interface 103
Network Commands
Set Gateway
Description Configures the gateway.
User Level Admin
Syntax
Options <config_gateway_host>
You can view the configured gateways that can be deleted by typing
delete gateway ?.
default|host|network
<dest_ip_addr>
<subnet_bits>
Show Gateways
Description Shows configured gateways.
User Level Normal, Admin
Syntax
set gateway <config_gateway_host> default
set gateway <config_gateway_host> host <destination_ip>
set gateway <config_gateway_host>
network <dest_ipv4_addr>|<dest_ipv6_address>
[<subnet_bits_0-32>|<subnet_bits_0-128>]
Specify the type of gateway:
z Default—A gateway which provides general access beyond your local network.
z Host—A gateway reserved for accessing a specific host external to your local
network.
z Network—A gateway reserved for accessing a specific network external to your
local network.
When the gateway is a Host or Network gateway, you must specify the IP address of
the target host machine/network.
When the gateway is a Network gateway, you must specify the subnet/prefix bits for
that network. If the IP address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the
IP address is IPv6, then the Subnet/Prefix Bits range is 0-128.
show gateways
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 121 122

Comentarios a estos manuales

Sin comentarios