Perle Systems IOLAN SCS Manual de usuario descargar pdf (Pagina 258)

100

101

Channels

258 IOLAN SDS/SCS/STS User’s Guide, Version 3.6

Adding/Editing a Multihost Entry

When you click the Add or Edit button, the Host Entry window appears. The hosts in the multihost

list must already be defined (see

Host Table on page 88 to learn how to create a host). If you add a

host that was defined with its fully qualified domain name (FQDN), it must be resolvable by your

configured DNS server.

Configure the following parameters:

TCP Port Specify the TCP port that the I/O channel or serial signal pin will use to

communicate to the

Primary Host.

Default: 2000 for channel 1, then increments by one for each channel

Backup Host Specify a preconfigured host that the I/O channel or serial signal pin will

communicate to if the I/O channel cannot communicate with the

Primary Host.

Default: None

TCP Port Specify the TCP port that the channel or serial signal pin will use to

communicate to the

Backup Host.

Default: 0

Host Name Specify the preconfigured host that will be in the multihost list.

Default: None

TCP Port Specify the TCP port that the I/O channel or serial signal pin will use to

communicate to the

Host.

Default: 0

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 407 408

Comentarios a estos manuales

Sin comentarios

Perle Systems IOLAN SCS Manual de usuario Pagina 258

Comentarios a estos manuales