Perle Systems IOLAN SCS Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 408
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Getting to Know Your IOLAN
38 IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Console/Serial Switch
Located at the back of the desktop IOLAN models is a switch that controls whether serial port 1 is in
Console or Serial mode.
Look at your model to verify the direction of the ON switch position. ON indicates that serial port 1
is in Console mode; otherwise serial port 1 is in Serial mode.
Console Mode
Console mode is used when you have a direct connection between a serial device (like a terminal or a
PC) and the IOLAN, accessed by the Admin user to configure/manage the IOLAN. Console mode
automatically sets serial port settings as:
z Serial Interface to EIA-232
z Speed to 9600
z Flow Control to No
z Bits to 8
z Stop Bits to 1
z Parity to None
Console mode also displays extra system messages.
Serial port 1 will ignore any Serial Port settings when in Console mode, so you need to turn Console
mode off to use serial port 1 in your network.
Serial Mode
Serial mode is used when the IOLAN acts as a communications server, or anytime you are not
connecting directly to the IOLAN to configure it. You can connect directly to the IOLAN in Serial
mode, but the IOLAN will not display all the messages/information you will get in Console mode.
Dedicated Console Port: Rack Mount Models
The rack mount IOLAN models have a dedicated Console port, located on the LED side of the
IOLAN. You can use the supplied Administration cable (with the supplied
RJ45JDB9F adapter if
needed)
to connect a terminal to the Console/Admin port to view diagnostic information and/or
configure the IOLAN using the Menu or Command Line Interface (CLI). You can configure the baud
rate and flow control of the dedicated Console port.
Note:
The SDS T (Extended Temperature) models have two switches, Switch 1 is used for
Console/Serial mode and Switch 2 is unused.
Note:
When the console switch is in the on position, the Power/Ready LED will cycle on and off
(flashes green).
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 407 408

Comentarios a estos manuales

Sin comentarios